Large Hanging Plating Alkaline Galvanizing Automatic Electroplating Line

The entire plating machine is controlled by a programmable controller, which can be programmed into multiple process flows to adapt to various production processes of different plating parts. Manual/automatic functions can be selected for easy operation.

Hanging Plating Parameters

1. There should be good adhesion between the coating and the base metal, and between the coatings.

2. The coating should be crystallized and fine, smooth and uniform in thickness.

3. The coating shall have the specified thickness and as few porosity as possible.

4. The coating should have the specified indicators, such as brightness, hardness, conductivity, etc. the

5. The ambient temperature is -10℃～60℃;

6. The input voltage is 220V±22V or 380V±38V;

7. The maximum working noise of water treatment equipment should not exceed 80dB(A).

8. The relative humidity (RH) should not exceed 95%;

9. The COD content of raw water is 100mg/L～150000mg/L.

10. The electroplating time and the temperature of the electroplating process determine the thickness of